Manfred's TR1. Discussion Boards
https://www.tr1.de/cgi-bin/yabb2/YaBB.pl

TR1 Discussion Boards >> General technical TR1 discussions >> TR1 Upper Engine Mounts
https://www.tr1.de/cgi-bin/yabb2/YaBB.pl?num=1233848497
Message started by gerryg on 05.02.09 at 16:41:37

Title: TR1 Upper Engine Mounts
Post by gerryg on 05.02.09 at 16:41:37
Hi. The Virago has small mounts to the frame for the rear cylinder head (as well as the large one for the front head).
My question is does the TR1 have rear cylinder head mounting brackets? If so are they rubber mounted or solid bolt up.
Thanks
GerryG


Title: Re: TR1 Upper Engine Mounts
Post by oberpuk on 06.02.09 at 12:41:42

gerryg wrote:
Hi. The Virago has small mounts to the frame for the rear cylinder head (as well as the large one for the front head).
My question is does the TR1 have rear cylinder head mounting brackets? If so are they rubber mounted or solid bolt up.
Thanks
GerryG


Hi Gerry,

the rear cylinders are rubber mounted. Orig. spare Part No. 4X7-21485-00 (Damper rubber) and 90387-100E2 (Collar) and 90201-104A7 (washer, plate)

Georg


Title: Re: TR1 Upper Engine Mounts
Post by gerryg on 06.02.09 at 16:30:17
Thanks Georg for the info.
I didn't think the TR1 had rear mounts as my cylinder head studs don't look long enough. I will have to see if Sepp or any of the other members have any spares to go on the special I am building.
Regards
Gerry