Manfred's TR1. Discussion Boards
https://www.tr1.de/cgi-bin/yabb2/YaBB.pl TR1 Discussion Boards >> Help me! I'm lost with my TR1! >> Misfire and odd noise @ 3000 rpm https://www.tr1.de/cgi-bin/yabb2/YaBB.pl?num=1343629616 Message started by Colin on 30.07.12 at 08:26:56 |
Title: Misfire and odd noise @ 3000 rpm Post by Colin on 30.07.12 at 08:26:56
Hi guys, has anyone and ideas about why my TR1 engine would make an odd noise and loose power and revs at 3000rpm for about 10 seconds and then clear. It does it whether hot or cold and only sometimes. I have stripped and decoked the top end + a valve grind, compression is good, cam chains are fine but No1 cylinder is running rich at idle, ok at revs according to coloutune. Thanks in advance. Colin :-?
|
Title: Re: Misfire and odd noise @ 3000 rpm Post by Odin on 30.07.12 at 16:14:57
Check your ignition coils, and / or your TCI (black box). The TCI is now 30 years old and also the ignition coils that dissolve slowly by showing the temperature differences. |
Title: Re: Misfire and odd noise @ 3000 rpm Post by Colin on 31.07.12 at 06:40:40
Thanks Odin i'll try that, i've got a spare set of coills :)
|
Title: Re: Misfire and odd noise @ 3000 rpm Post by Odin on 31.07.12 at 15:40:16
try also to change the ignition coil of wire to spark plug. Do not buy expensive cables, just buy a cheap makes less problems. You can also use external coils, must have 85 ohm output to the spark plug in which brand does not matter Attention, the TCI may, it does not work if you can not plug the polls on mass. Can then quickly pass a defect. Problems 3000Rmp is often a problem with TCI have had many here. You press the thumb ;) |
Title: Re: Misfire and odd noise @ 3000 rpm Post by Colin on 12.08.12 at 16:54:39
Have swapped ignition coils for another set No change Have swapped TCI for another one No change Will try pickup coils next |
Title: Re: Misfire and odd noise @ 3000 rpm Post by Colin on 16.08.12 at 19:11:10
:) Fixed Swapped pick up coils even though old ones tested ok and swapped alternator old one had burn mark on 3 pin plug Runs fine now ![]() |
Title: Re: Misfire and odd noise @ 3000 rpm Post by Odin on 17.08.12 at 08:34:58
Hy super that you found the mistake, and fix it ;D ;D ;D A so simply mistake, can make so bad troubel ;) |