|
Manfred's TR1. Discussion Boards
https://www.tr1.de/cgi-bin/yabb2/YaBB.pl TR1 Discussion Boards >> General technical TR1 discussions >> 630 standard chain or 630 Oring ? https://www.tr1.de/cgi-bin/yabb2/YaBB.pl?num=1350518367 Message started by tophased on 18.10.12 at 01:59:27 |
|
Title: 630 standard chain or 630 Oring ? Post by tophased on 18.10.12 at 01:59:27
hi im not running the enclosed chain drive can you run a 630 O ring chain or is it to wide thanks j |
|
Title: Re: 630 standard chain or 630 Oring ? Post by ernie8 on 28.10.12 at 18:22:57
Hi J the 630 O ring fits to the machine even with chain case. regards Juergen |
|
Title: Re: 630 standard chain or 630 Oring ? Post by tophased on 28.10.12 at 23:50:45
thanks |
|
Title: Re: 630 standard chain or 630 Oring ? Post by Urban on 02.12.12 at 21:53:36
According to the manual, one should not use chains with o rings because of the heat. But if you remove the enclosure should be fine to use chains with o rings. |