|
Manfred's TR1. Discussion Boards
https://www.tr1.de/cgi-bin/yabb2/YaBB.pl TR1 Discussion Boards >> General technical TR1 discussions >> Wheel spacers https://www.tr1.de/cgi-bin/yabb2/YaBB.pl?num=1468947960 Message started by rantingsmith on 19.07.16 at 19:06:00 |
|
Title: Wheel spacers Post by rantingsmith on 19.07.16 at 19:06:00
So I got a XS650 wheel for my Trine which I have been told is a direkt swap but as my project came all in boxes and had been converted to Suzuki 17" wheels I do not have a set of original spacers.. so could someone please measure their rear wheel spacers for me please? I am using a GL1000 wheel for the front so I'll work those out myself. Thank you. |
|
Title: Re: Wheel spacers Post by nanno on 19.07.16 at 20:47:14
Give me a shout on faceache tomorrow, lest I forget...
|
|
Title: Re: Wheel spacers Post by rantingsmith on 19.07.16 at 22:55:43
Cool, thanks, I'll FB PM you as I have been staying off it since the whole Brexit thingy.. :)
|
|
Title: Re: Wheel spacers Post by kdemery on 20.07.16 at 15:37:19
Hello Here is what you need. From left to right: TR1 Axle TR1 chain tensioner XS650 axle spacer 25mm XS650 axle spacer 31mm TR1 axle spacer 36mm TR1 chain tensioner All the best. Kevin  |
|
Title: Re: Wheel spacers Post by rantingsmith on 21.07.16 at 06:10:35
Cool, Thanks Kevin! Any Reason you can think of that the two on the left can't be just one spacer? Also why has the no2 spacer got a wider flange? Cheers, Rant. |
|
Title: Re: Wheel spacers Post by kdemery on 21.07.16 at 16:01:40
Hello Rant The number 2 spacer flange is 'push on'. It can slide along the spacer shaft and works as a dust cover over the wheel bearing. You could combine the first two spacers as one but you would need to make a dust cover to protect the bearing. Given the work involved it may be better for you to source the original XS650 spacers? Best of luck Kevin |