|
Manfred's TR1. Discussion Boards
https://www.tr1.de/cgi-bin/yabb2/YaBB.pl TR1 Discussion Boards >> Help me! I'm lost with my TR1! >> How to modify front forks https://www.tr1.de/cgi-bin/yabb2/YaBB.pl?num=1536098290 Message started by kdemery on 04.09.18 at 23:58:10 |
|
Title: How to modify front forks Post by kdemery on 04.09.18 at 23:58:10
Hello Can any one point me to the instruction documents on how to modify the front forks? I believe it involves welding closed a hole and enlarging another. Thanks in advance for your help. Kevin |
|
Title: Re: How to modify front forks Post by Ali on 05.09.18 at 07:46:36
Hi Kevin, look here: https://www.tr1.de/technics/techinfo/page8e.htm instead of closing the upper bores/ holes and drilling at 3mm, Sepp told me once he now just closes the 2 bores without drilling them up again. I did it that way , and added stronger springs, Regards Ali |
|
Title: Re: How to modify front forks Post by Gredner on 05.09.18 at 09:14:53
Hi Kevin, I modified the front fork of my tr1 a few years ago according to this manual. along with harder feathers and other oil, the front fork has become much better. |
|
Title: Re: How to modify front forks Post by kdemery on 05.09.18 at 19:43:48
Thank you That is just what I needed. Regards Kevin |