Manfred's TR1. Discussion Boards
https://www.tr1.de/cgi-bin/yabb2/YaBB.pl Old TR1 Discussion Boards (read only) >> Discussion Board 2004 >> gearbox lever - sloppy https://www.tr1.de/cgi-bin/yabb2/YaBB.pl?num=1095489840 Message started by Lars Sandström(Guest) on 18.09.04 at 08:44:00 |
Title: gearbox lever - sloppy Post by Lars Sandström(Guest) on 18.09.04 at 08:44:00
I think a spring in the gearbox has broken. The gearbox lever is sloppy and doesn't return to it's ordinary position. I can shift gears if i fiddle a lot with the lever so the gears seems all right. Is the spring situated inside the crancases?? I wonder if I have to split the engine in order to repair this?
|
Title: gearbox lever - sloppy Post by Georg Horn(Guest) on 19.09.04 at 00:10:00
Hi, maybe http://tr1.de/tr1/microfiche/c14_dwg.jpg is what you are looking for. Number 4 should be the spring that returns the lever into the center position after shifting. Perhaps you can replace it after removing the left side engine cover. Bye, Georg |
Title: gearbox lever - sloppy Post by Lars Sandström(Guest) on 19.09.04 at 00:52:00
Yes! I seems possible! I can see here: http://www.tr1.de/cgi-bin/service.cgi?key=xv750se&lng=eng&flg=0&pge=3018 that the shifter can be removed if you remove the left side engine cover as you said. The spring comes out together with the shifter. Many thanks George! I should remove the cover anyway to change the o-ring for the starter engine (it leaks oil there). In the mean time I can drive with #2 (the red TR1 from 83, http://www.buf-online.kristianstad.se/~lars.sandstrom/mars04.JPG) so all is fine! Regards, Lars |
Title: gearbox lever - sloppy Post by Lars Sandström(Guest) on 23.09.04 at 10:50:00
Took off the left side engine cover and the spring looked allright! When I pushed at it with my finger it fell apart! Now I'm searching for a new one or maybe I'll make a new spring from scratch.
|