Manfred's TR1. Discussion Boards
https://www.tr1.de/cgi-bin/yabb2/YaBB.pl TR1 Discussion Boards >> General technical TR1 discussions >> Carburator float https://www.tr1.de/cgi-bin/yabb2/YaBB.pl?num=1623160782 Message started by JBXV1000 on 08.06.21 at 15:59:42 |
Title: Carburator float Post by JBXV1000 on 08.06.21 at 15:59:42
afternoon do you have any pictures with the right adjusment of the carburator Float, I get an issue with the gas as some lick from the exhaust when I try to start the bike (which its not start at all ;D) thanks
|
Title: Re: Carburator float Post by nanno on 08.06.21 at 20:45:02
When you turn the carb upside-down, the float should be parallel to float-chamber mating surface.
|
Title: Re: Carburator float Post by JBXV1000 on 08.06.21 at 20:53:31
Thanks for the feed back, i check also that way, great video. https://youtu.be/2XWe001Y2ms |