Manfred's TR1. Discussion Boards
https://www.tr1.de/cgi-bin/yabb2/YaBB.pl TR1 Discussion Boards >> Tips, tricks and solutions for the TR1 >> snapped bolt repair https://www.tr1.de/cgi-bin/yabb2/YaBB.pl?num=1651933545 Message started by craybait on 07.05.22 at 16:25:45 |
Title: snapped bolt repair Post by craybait on 07.05.22 at 16:25:45
thanks to the forum for information. I used a 10 mm tube as a guide and a long 9 mm drill to drill the snapped of end of the long bolt[approx 120 mm] on the chain side that always snaps. the small piece that was broken fell down to the workshop floor when i put the new bolt in , it was about 5 mm long i sprayed lots of lubricant a few days before and used cutting fluid on the drill. |