Welcome, Guest. Please Login or Register.
20.04.24 at 11:09:12
Home All forum attachments and linked/autosaved images Help Search Login Register Sprache umschalten für Gäste

Manfred's TR1. Discussion Boards › Old TR1 Discussion Boards (read only) › Discussion Board 2005
(Moderator: Manfred) 		‹ Sitzbank | Anyone tried running on a sing... ›
Pages: 1
Send Topic Print
pistons and rings (Read 4134 times)
Robert Druge(Guest)
Ex Member
pistons and rings
30.10.05 at 20:20:00  
Are there any sources of TR1 pistons and rings? can my xv920RH be bored out to 1000cc to accept these pistons? it seems that there no sources here in us that carries pistons & rings for a 920.  thanks , bob

 
 
Top of page
  IP Logged
Lars Sandström(Guest)
Ex Member
pistons and rings
Reply #1 - 02.11.05 at 19:16:00  
To my knowledge; yes! It's the only easy hop-up that can be done. From 750 you'll have to make special pistons cause the wristpins are smaller than the 920 and up. To get 1100 you have to change crankshaft (longer stroke) and have the same bore as the xv1000 (or TR1.)Pistons and rings can be bought from a YAMAHA dealer.

 
 
Top of page
  IP Logged
Bob Jenneson(Guest)
Ex Member
pistons and rings
Reply #2 - 04.12.05 at 04:46:00  
You can put 1100CC pistons and cylinders on a 920RH. The only difficulty is that you need to over bore the crankcase to fit the larger O.D. of the cylinders.

 
 
Top of page
  IP Logged
Pages: 1
Send Topic Print
Manfred's TR1. Discussion Boards › Old TR1 Discussion Boards (read only) › Discussion Board 2005
(Moderator: Manfred) 		‹ Sitzbank | Anyone tried running on a sing... ›

Powered by YaBB 2.1 © 2000-2005 / Modifications © 2005-2024 Manfred Drechsel
[Generated in 152 ms]