Hi Kevin, hi all,
shortly ago I began to install a 12 V lighting system in my little two-stroke bike (Honda MT8). Formerly, Honda had installed a 6 V system only. And as the indicators had been nearly invisible within that low voltage system, I thought that a transformation to 12 V would be great - including LED indicator lights of course.
But when I ordered a load independent relay for the LED lights, I had to learn that those relays need a
minimum load (of e. g. 10 W). So if you use two LED indicator bulbs (2 x 1.6 W) and a conventional control light bulb in the control panel (another 3...4 W), that would be less than the 10 W minimum that some relays want to get. Later, I found another load independent relay that has a minimum load of 1 W only. So, Kevin, you could check what the minimum appetite of your two relays is.
Good luck for fixing/tuning your bike

.
Triwinger