Manfred's TR1. Discussion Boards

Welcome, Guest. Please Login or Register.

06.05.25 at 08:01:49

Manfred's TR1. Discussion Boards › TR1 Discussion Boards › Help me! I'm lost with my TR1!
(Moderator: Manfred)

Pages: 1

new o/s pistons (Read 4448 times)

paulinaus Ex Member	new o/s pistons 24.11.09 at 05:11:33 hello from australia. trying to find o/s pistons and rings for the TR1, does anyone know if the piston and rings from a early xv1000 virago part no 42H-11636-00-00 will fit the tr1, all the specs are the same. any help will be much appreciated, , nothing here in australia, i need 2nd o/s pistons and rings thank you, paul
paulinaus Ex Member
	IP Logged

crazy cow Ex Member	Re: new o/s pistons Reply #1 - 24.11.09 at 09:58:15 Quote from paulinaus on 24.11.09 at 05:11:33: hello from australia. trying to find o/s pistons and rings for the TR1, does anyone know if the piston and rings from a early xv1000 virago part no 42H-11636-00-00 will fit the tr1, all the specs are the same. any help will be much appreciated, , nothing here in australia, i need 2nd o/s pistons and rings thank you, paul hi paul, are you sure the number you posted is not fom a xv920? The XV1000 pistons should fit. The TR1 part no is 5A8-11631-00 A0. Yo can find it on the "Tech Info" site and "Yamaha TR1 micro fiche". So long, Olaf
crazy cow Ex Member
	IP Logged

crazy cow Ex Member	Re: new o/s pistons Reply #2 - 24.11.09 at 15:53:43 hi Paul, the 42H is the (newer) XV1100 Virago Type. Even when the pistons do have the same diameter, they probably have different piston skirt, boreholes and weight. The crankshaft is bigger. So long, Olaf
crazy cow Ex Member
	IP Logged

phineus TR1 Board Newbie Posts: 16 Gender: Bike: 1983 TR1 (it's black and NOISY!)	Re: new o/s pistons Reply #3 - 26.11.09 at 00:45:59 g'day paul! early XV1100 pistons are exactly the same as TR1 pistons - the 1100 gets it's extra capacity from a longer stroke. I rebored my 83 TR1 last year and fitted 2nd oversize 1100 pistons - it runs fine pistons 42H-11636-00-00 rings 42H-11610-20 piston pin 5A8-11633-00 circlip 93450-24028-00 TR1 pistons are now a discontinued part but 1100 pistons are still available from Yamaha www.cmsnl.com also stock many discontinued parts best do a bit of overtime tho mate - they aint cheap! Bob

	IP Logged

paulinaus Ex Member	Re: new o/s pistons Reply #4 - 26.11.09 at 02:37:33 thanks bob, i was hoping somebody had the same problem, bob, when i go to the cmsl website the earliest 1100 they have there is a 86, its part no. for the piston and rings starts with ..1TA ? the early 84 xv1000s start with 42H ? see what u mean about the overtime, thats why i need to get it right. sorry to be a pain mate but are the numbers you put down the numbers you used to order your parts? thats again for the reply spent to much on the bike to let it go now. cheers paul
paulinaus Ex Member
	IP Logged

phineus TR1 Board Newbie Posts: 16 Gender: Bike: 1983 TR1 (it's black and NOISY!)	Re: new o/s pistons Reply #5 - 26.11.09 at 09:00:30 Hi Paul, the pistons i fitted were part no. 42H-11636-00-00 I got them through a yamaha dealer. Total cost including rings etc was about 270GBP The TR1 part no is 5A8-11636-00-00 You'll notice the part No is the same, it's just a different prefix so 1TA-11636-00-00 pistons will fit as well Try your yamaha dealer 1st - they may need to back-order from japan which will take about 5weeks for delivery but is likely to be a bit cheaper than cms http://www.speedsupplies.com/cartdisplay.asp have pistons at 175USD good luck! Bob

	IP Logged

paulinaus Ex Member	Re: new o/s pistons Reply #6 - 26.11.09 at 10:06:39 cheers bob, theres light at the end of the tunnel. when i gave the part no to my local dealer here in queensland he said they would be on a back order but i agree would be quicker to get from the states and cheaper...paul
paulinaus Ex Member
	IP Logged

Pages: 1

Manfred's TR1. Discussion Boards › TR1 Discussion Boards › Help me! I'm lost with my TR1!
(Moderator: Manfred)