Welcome, Guest. Please
Login
or
Register
.
Match all words
Match any words
Match as phrase
Match partial words
week
month
three months
year
all posts
10.05.25 at 09:13:10
Manfred's TR1. Discussion Boards
›
TR1 Discussion Boards
›
Help me! I'm lost with my TR1!
(Moderator:
Manfred
)
‹
Neuer Auspuff, aber...
|
Motor"tuning" BT1100 generell...
›
Pages: 1
Leaking petcock (Read 3236 times)
Commuterrex
Ex Member
Leaking petcock
29.05.07 at 19:48:48
I have a leaking fuel petcock on my XV920RH, the rubber valve that is actuated by the engine vacuum must have a tiny leak. Gasoline ends up in the vacuum line, which disrupts everything and the bike is not idling.
My question is, can I find this petcock anywhere, and was the same unit used on the more numerous 920 and 1000cc Virago models?
Thanks,
Frank
Commuterrex@yahoo.com
IP Logged
hornschorsch
TR1 Board Extraterrestrial Member
Posts: 2884
Gender:
Bike: TR1, SR500, XJ650-Turbo, RD350-YPVS, R[DG]500
Re: Leaking petcock
Reply #1 -
30.05.07 at 10:12:59
There are petcock repair kits available, for example at louis.de or in ebay. Or maybe you find a used but still good petcock in ebay.
Bye,
Georg
Gruss,
Schorsch
Fahrt so schnell ihr könnt, so lange ihr noch könnt!
(Uli Peil im XJ-Forum)
Das Ding ist völlig unnötig!
(Roel im TR1-Forum)
IP Logged
HolKel
TR1 Board Full Member
Posts: 127
Gender:
Bike: (verkauft.. :-( )
Re: Leaking petcock
Reply #2 -
31.05.07 at 17:39:32
I know this sounds rude..
I had a bad rattle problem with the vacuum system some years ago and decided to just rip it out completely:
* disconnect the vacuum hoses and seal the connectors
* take the little lever off (screw on the backside, I believe)
* turn it 180 deg. and put it back on
=> Now the petcocks have to operated manually and the lever positions are inverted:
* lever forward is "off"
* lever up is "run"
* lever to rear is "reserve"
I hope I didn't forget anything in the assembly sequence, it has been a couple of years and I haven't touched them since then. All I know is that it's working fine!
Holger
IP Logged
HolKel
TR1 Board Full Member
Posts: 127
Gender:
Bike: (verkauft.. :-( )
Re: Leaking petcock
Reply #3 -
31.05.07 at 17:50:27
I actually did forget something: You might want to take the little placard off the peacock and turn it 180 deg. with the levers, then the descriptions still make some sense...
And I found my old post (all in German):
https://www.tr1.de/tr1_forum/messages/185.html
Have fun!
Holger
IP Logged
Pages: 1
Manfred's TR1. Discussion Boards
›
TR1 Discussion Boards
›
Help me! I'm lost with my TR1!
(Moderator:
Manfred
)
‹
Neuer Auspuff, aber...
|
Motor"tuning" BT1100 generell...
›
Forum Jump:
-----------------------------
TR1 Discussion Boards
-----------------------------
- General technical TR1 discussions
=> Help me! I'm lost with my TR1!
- Tips, tricks and solutions for the TR1
-----------------------------
TR1 Trading Boards
-----------------------------
- Bikes, parts and other stuff to sell
- Spare part sources and looking for ...
-----------------------------
TR1 Travel & Racing Boards
-----------------------------
- TR1 rally, trips, racing and more
-----------------------------
TR1 Board Announcements And General Issues
-----------------------------
- New board features and more
- General and non-technical TR1 discussions
- In Memoriam
-----------------------------
Old TR1 Discussion Boards (read only)
-----------------------------
- Discussion Board 2005
- Discussion Board 2004
- Discussion Board 2003
- Discussion Board 2002
- Discussion Board 2001
- Discussion Board 2000
- Travel Board
Powered by
YaBB 2.1
© 2000-2005
/
Modifications © 2005-2025 Manfred Drechsel
[
Generated in 196 ms
]