Welcome, Guest. Please Login or Register.
07.10.24 at 10:51:28
Home All forum attachments and linked/autosaved images Help Search Login Register Sprache umschalten für Gäste

Pages: 1
Send Topic Print
Upgrading of VX920 to the 1100 (Read 8558 times)
Ortwin Verreydt(Guest)
Ex Member



Upgrading of VX920 to the 1100
18.06.02 at 22:18:00
 
Has anyone upgraded an 86' XV920 to the 1100 version?
I would like to keep the looks of the old style engine but increase the displacement to the 1100 version.
Has anyone done this before and can help me with some practical advise or,
does someone know of a specialist that can do it for me?
Thanks.

 
 
Top of page
  IP Logged
Thorsten (Canada)(Guest)
Ex Member



Upgrading of VX920 to the 1100
Reply #1 - 19.06.02 at 04:49:00
 
Hi Ortwin, it's easy to increase displacement from 920 to 980 cc, as this only involves larger bore pistons.  However, the increase to 1100 cc involves a crankshaft with more stroke, which (I presume anyway) doesn't fit in the 920 crankcase.
Cheers,
Thorsten

 
 
Top of page
  IP Logged
Tomas Petterssson(Guest)
Ex Member



Upgrading of VX920 to the 1100
Reply #2 - 21.06.02 at 08:20:00
 
Thorsten lies a little ,my machine TR1 is now 1200cc and it is bored from 95mm to 105mm and the same stroke as stock 69,2mm.
Tomas Pettersson
President of the Swedish TR1 / XV 750 Club
I don't like to write long letters, prefere to talk on the phone !

 
 
Top of page
  IP Logged
Lars Sandström(Guest)
Ex Member



Upgrading of VX920 to the 1100
Reply #3 - 22.06.02 at 11:17:00
 
The crancase of XV-models 750-1100 is the same with the exeption of the final drive. The crancshaft of the XV1100 should fit the XV920 so if you cange cylinders and crancshaft you should get 1100 cc.
Best regards
Lars

 
 
Top of page
  IP Logged
Thorsten (Canada)(Guest)
Ex Member



Upgrading of VX920 to the 1100
Reply #4 - 24.06.02 at 02:33:00
 
It's interesting that the 920 crank case will accept the 1100cc crank.  But wouldn't one have to use longer cylinders to make up for the greater stroke, and also longer cam chains?
Cheers,
Thorsten

 
 
Top of page
  IP Logged
Thorsten (Canada)(Guest)
Ex Member



Upgrading of VX920 to the 1100
Reply #5 - 24.06.02 at 02:36:00
 
Hi Tomas, what pistons are you using, and did you have to re-sleeve the cylinders and bore the crankcase?
Cheers,
Thorsten

 
 
Top of page
  IP Logged
Tomas Pettersson(Guest)
Ex Member



Upgrading of VX920 to the 1100
Reply #6 - 27.06.02 at 13:20:00
 


 
 
Top of page
  IP Logged
Chris Johnson(Guest)
Ex Member



Upgrading of VX920 to the 1100
Reply #7 - 12.02.03 at 15:25:00
 
This was written by Lars Sandstrom:
"The crancase of XV-models 750-1100 is the same with the exeption of the final drive. The crancshaft of the XV1100 should fit the XV920 so if you cange cylinders and crancshaft you should get 1100 cc.
Best regards
Lars"
I want to put Virago 1100 crank and top end on my XV920RH.  The above "should fit" I would know if is "definitely will fit."  It would be very expensive for me to buy the `98 Virago 1100 engine I'm considering, only to have it not really fit.  I can do some machining, but don;t want a big design project because they do not really interchange.  The key question has to do with models.  I know the later 750 to 1100 are the same, the question really concerns the very early 920 (1981).
-Chris

 
 
Top of page
  IP Logged
Ortwin Verreydt(Guest)
Ex Member



Upgrading of VX920 to the 1100
Reply #8 - 27.03.03 at 19:56:00
 
Thorsten, This is exactly what I am doing right now.
Basically use the TR1 pistons.
Next on my agenda is to replace the carburetors for a larger one.
But not as they are fitted today but a single carburetor with a single intake manifold to avoid the difficult alignment adjustments and to create a cleaner look.
This will be a "next winter job"

 
 
Top of page
  IP Logged
Pages: 1
Send Topic Print