Manfred's TR1. Discussion Boards - List of known modifications or upgrades

Welcome, Guest. Please Login or Register.

19.04.24 at 07:42:50

Manfred's TR1. Discussion Boards › TR1 Discussion Boards › Tips, tricks and solutions for the TR1
(Moderator: Manfred)

‹ No topic | Aufwändiger Umbau ›

Pages: 1 2

List of known modifications or upgrades (Read 9855 times)

wintsoz Ex Member	Re: List of known modifications or upgrades Reply #10 - 27.07.18 at 01:29:10 Hi Greg & TR 1 fans I own 2 x 1981 xv 1000 solos and currently building a Pre 85 Sidecarcross with a Tr 1 motor to race in Germany - Klienhau 2020. I have found a 2010 XVS 1100 complete donor bike 9000kms for the suggested engine mods. Is this the correct model for the Crank, Barrels,Rods, Heads . Also do the gears clutch & starter assembly fit the 81 Tr 1? I see a company in USA https://www.pacificcoaststar.com/pcs/v_star_1100_engine.htm. Im interested in their x3 Cam and dual valve spring conversion & the Keihin Flat slides. Have you heard any reports about their gear? Yes Im after 90 + HP Regards Darren
wintsoz Ex Member	32538509_1773631772682815_266775863456956416_n.jpg Picture below may be scaled. Click link or picture for original size \| Click here for all attachments
	IP Logged

nanno TR1 Board Extraterrestrial Member Ich mags halt gern ned ganz so original... Posts: 2205 Gender: Bike: TR1, XT600, SR500-Gespann	Re: List of known modifications or upgrades Reply #11 - 27.07.18 at 23:06:25 Greetings Darren, with regards to the XVS1100 parts: Yes and no. The liners are a bigger O.D. and as such the cases need to be bored out to suit or the liners turned down to fit the cases. Gearbox and clutch can be fitted to TR1 cases, but they are a different spline pattern on the clutch hub and as such you're then limited to stick with the BT/XVS parts. The starter on the XVS is inferior to what was installed on the TR1. The best starter bendix is to be found on late Virago 1100s (the version without a spring). The oldskool-no-hassle swap are Virago 1100 parts as they are a straight swap. Additionally those also sport a heavier crank, which might be beneficial on a sidecar. Cheers, Greg
	Frei ist, wer frei denkt! http://greasygreg.blogspot.co.at/
	IP Logged

Sepp TR1 Board Extraterrestrial Member TRi onli !!! Posts: 1558 Gender: Bike: Jede Menge TRi's	Re: List of known modifications or upgrades Reply #12 - 28.07.18 at 08:03:56 Hi Darren, i think with the X3 you get a problem between valves and piston in a original 1000 engine. S.
	Racing is the answer, but I don't remember the question!
	IP Logged

Piddy TR1 Board Newbie Posts: 1	Re: List of known modifications or upgrades Reply #13 - 14.04.24 at 07:35:03 I have just purchased original oil filter. I notice the old filter had a slot in it and the new one different (no slot) I looked at it and cut a slot on supply side to make it fit...anyone heard of this ?
Piddy TR1 Board Newbie Posts: 1
	IP Logged

hornschorsch TR1 Board Extraterrestrial Member Posts: 2754 Gender: Bike: TR1, SR500, XJ650-Turbo, RD350-YPVS, R[DG]500	Re: List of known modifications or upgrades Reply #14 - 14.04.24 at 12:58:31 This is no known modification or update, thus wrong thread... Can you post a picture of the filter with the slot? The filter fits without cutting slots into it, provided that you mount it the right way. The opening belongs to the outside. Stick it on a finger and then put it into the housing, then it´s right.
	Gruss, Schorsch Fahrt so schnell ihr könnt, so lange ihr noch könnt! (Uli Peil im XJ-Forum)
	IP Logged

Pages: 1 2

Manfred's TR1. Discussion Boards › TR1 Discussion Boards › Tips, tricks and solutions for the TR1
(Moderator: Manfred)

‹ No topic | Aufwändiger Umbau ›