Welcome, Guest. Please Login or Register.
23.09.23 at 05:57:15
Home All forum attachments and linked/autosaved images Help Search Login Register Sprache umschalten für Gäste

Manfred's TR1. Discussion Boards › Old TR1 Discussion Boards (read only) › Discussion Board 2003
(Moderator: Manfred) 		‹ Öldruckschalter | TR1 ›
Pages: 1
Send Topic Print
Gear change (Read 2303 times)
Mike Stoner(Guest)
Ex Member
Gear change
11.07.03 at 19:24:00  
I have a 1981 TR1 imported to the UK from Japan in 1991. It has a 748 cc engine.
I can get 1-N-2 gears but not 3 and onwards. When I operate the lever by hand it seems to work OK but doesn't return to center after a change which I guess when riding causes the problem.
Any ideas?
I am planning to replace the shift shaft and associated springs first of all.

 
 
Top of page
  IP Logged
Lars Sandström(Guest)
Ex Member
Gear change
Reply #1 - 12.07.03 at 09:51:00  
Probably the shift forks(s) is bent. Just to be safe you can try and put in fresh oil (20W/40) and see if the box gets any better. Anyhow; when you dismantle the engine you´ll se what´s the matter!
Regards Lars (owner of a Tr1. 1981 998 cc)

 
 
Top of page
  IP Logged
Mike Stoner(Guest)
Ex Member
Gear change
Reply #2 - 12.07.03 at 16:09:00  
I've just been on a longer run and managed to change up through all gears.
This was done by pushing the shifter down with the clutch out and then pulling it in and changing up. A spring? that should centre the shifter in between changes.

 
 
Top of page
  IP Logged
Georg Horn(Guest)
Ex Member
Gear change
Reply #3 - 13.07.03 at 10:43:00  
Hi,
i believe that the spring that moves the lever back into the middle position after shifting up or down is broken.
Bye,
Georg

 
 
Top of page
  IP Logged
Pages: 1
Send Topic Print
Manfred's TR1. Discussion Boards › Old TR1 Discussion Boards (read only) › Discussion Board 2003
(Moderator: Manfred) 		‹ Öldruckschalter | TR1 ›

Powered by YaBB 2.1 © 2000-2005 / Modifications © 2005-2023 Manfred Drechsel
[Generated in 93 ms]